Moduły sieciowe

Tutaj znajdziesz informacje dotyczące modułów sieciowych do systemu FP2SH. ...
Czytaj więcej
Zapytaj o cenę

  • Opis

Tutaj znajdziesz informacje dotyczące modułów sieciowych do systemu FP2SH.

Multi communication unit

 

The FP2-MCU module enables quick and efficient data exchange between Panasonic's FP2 series PLCs and other automation systems. Detachable interface modules make it easy to connect an FP2 PLC to a variety of serial communications devices such as operator terminals, sensor systems, vision systems, temperature controllers, remote maintenance or diagnostic systems or to additional PLCs.

  • Fast communication speeds of up to 230Kbps
  • Communication protocol options including RS232C, RS422 or RS485
  • Double isolation of the communications channel
  • Up to 19 modules can be connected in one system
  • Transmission distances of up to 1200m can be achieved

 

   

FP2 Multi-wire link module and S-Link module

 

FP2 multi-wire link module FP2-MW

  • PLC link function:
    Enables data to be shared between programmable controllers, using cyclically transmitted link relays (L) and link registers (LD).
  • Data transfer function:
    Programmable controllers in the same system send and receive information pertaining to contacts and registers using the high-level instructions F145 and F146.
  • Remote programming function:
    The programming functions of a programmable controller can be used to program other programmable controllers in the same system, and for operations such as monitoring contacts and registers.

S-Link module FP2-SL2

  • The S-Link unit is used by assigning inputs (X) and outputs (Y). The inputs/outputs on the FP2 side that result from these assignments are treated as I/O addresses (S-Link I/O devices in the S-Link).
  • It controls up to 2,048 remote I/Os per FP2 system.

 

   

Ethernet-LAN module FP2-ET1

 

The FP2 ET-LAN module enables data exchange between different types of PLCs with a vendor-independent protocol and a short processing time. TCP/IP establishes logical point-to-point communication between two devices and provides the basis for exchanging information among all areas of production. You can connect 8 Ethernet segments with each other at a transmission speed of up to 100Mbits/s. Three communication interface types are supported: 10 BASE 5, 10 BASE-T, 100 BASE-TX.

 

 

  

FP2 MEWNET-VE Link Unit FP2-VE

  

With the FP2 MEWNET-VE Link Unit, you can connect PLCs controlled by an FP2SH CPU to our proprietary MEWNET network in VE mode and to other manufacturers' devices in the FL-net network.

FL-net is an increasingly popular, open technology based on industrial Ethernet and endorsed by the Japan Electrical Manufacturers' Association. In contrast to standard Ethernet, FL-net guarantees transmission times for data transfer, i.e. real-time data transmission is realized by employing FA link protocol on top of UDP/IP, yielding communication with a baud rate of 10Mbps.

Maximum number of connected link units
- VE mode: 99 units
- FL-net mode: 254 units

 

  

  

Fieldbus Slave Units

  

Powerful, compact, modular and high performance fieldbus slave units (FSU) are used together with the programmable controllers FP2/FP2SH series.
You can download all the slave data and convenient ready-made function libraries free of charge.
The fieldbus slave units are available for PROFIBUS, DeviceNet, CANopen and Profinet IO.
Others are planned for the future.

FP2 Fieldbus Slave Units

Name

Specifications

Part no.

FP2 PROFIBUS DP Slave Unit

PROFIBUS

FP2-DPV1-S

FP2 DeviceNet Slave Unit

DeviceNet

FP2-DEV-S

FP2 CANopen Slave Unit

CANopen

FP2-CAN-S

FP2Profinet IO Device Unit

Profinet IO

FP2-PRT-S

 

  

  

Fieldbus Master Units for PROFIBUS DP, CANopen and DeviceNet

  

The expansion Fieldbus Master Units (FMU) allow you to integrate FP2 PLCs as Master into your network with a maximum degree of flexibility. The units are available for three bus systems: PROFIBUS, DeviceNet and CANopen. For each network type, ready-made function libraries are available for the programming software Control FPWIN Pro. These libraries drastically shorten the time needed to develop your applications, and consequently save valuable human resource costs.

  • Zapytaj o cenę Moduły servo
  • Zapytaj o cenę Procesory
  • Zapytaj o cenę Szybkie liczniki